DMX30 Interface

This is a small dmx-interface for do-it-your-self.

The Schematics are made with gschem.

The PCB's are done with PADS and the sources are lost. We will make new versions soon with a freeware tool (probably eagle).

You don't need the printed PCB. You can also wire-wrap all parts together on a small experimental-pcb, because there should be less that 30 wired to wrap between the parts.

The AT89C2051 must be programmed with a programmer. I'm still searching for a free one.

Note! This is a very old design based on very old hardware. If you want to have a modern DMX interface look at our DMX43 interface.

Download

The package and documentation will be improved soon. However for the impatient here's the current state for download: dmx30.tar.gz updated 2001-09-13